PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO PROGRAM YOUR NEW REMOTE!
Programming procedure for SEA Smart Dual Copy Remotes
- Press and hold buttons 1 and 2 (shown in fig. 3) on the new remote for at least 5 seconds until the LED blinks rapidly, then release the buttons.
- Within 8 seconds, press the button on the new remote which you want to programme, the LED will stay lit. (fig.4)
- Take your existing remote and place it next to the new one(as shown in fig. 5)and press the button on the existing remote you wish to copy over onto the new remote. The Led should blink twice on the new remote to confirm the programming was successful.
2 Channel Transmitter
Batteries: 2 x CR2016
Dimensions: L - 6.4cm W - 3.3cm D - 1.3cm
|Number of Buttons||No|
|Info||All of our SEA gate and garage door remote controls come complete with batteries and full step by step programming instructions. We stock a full range of SEA replacement remote controls and gate or key fobs that can be used for controlling all types of electric gates and electric garage door openers. Please give us a call if you need advice on which remote transmitter to purchase.|
|Additional Information||SEA Smart Dual Gate & Garage Door Remote Fob Transmitter|
|Left or Right Handed Motor||No|
|Sliding or Swinging Gates||No|
|Number of Buttons||Three|